Scope |
Sampling rates |
2000sps, 20Ksps, 200Ksps, 2Msps, 20Msps (samples per
sec) |
Analog Bandwidth |
10MHz |
Buffer size |
32Kbytes |
Input resolution |
8 bits (better than 10mV at +- 1.2V range) |
Input ranges |
+-1.2V and +-12V (+-120V & +-1200V with
x10 & x100 probes) |
Input impedance |
1 MOhms//20pF via BNC |
Input modes |
Software selectable AC or DC |
Trigger |
Instant or digital triggering within input range
|
Selectable Triggered delay or normal display |
PreTrigger |
Off, 10 or 100 sample points |
Spectrum Analyzer |
Type |
FFT (Fast Fourier Transform) |
Range |
0 to 10MHz |
Signal Generator |
Frequency range |
5Hz to 500KHz settable to 1 percent. |
Accuracy to within 3%. |
Signal types |
Sine, Triangular, Saw, Square and any Custom waves. Variable
duty cycle for fixed freqency square wave. |
Sweep modes available on all the standard signal
types |
Sweep start freq. |
5,10,50,100,500,1000,5000,10000,50000,100000 Hz
|
Sweep Ratios of X2, X5 X10 and X20 |
Custom waves at selectable 2K, 20K, 200K, 2M &
20M Hz rates (e.g. can generate signals upto 10MHz) |
Generator buffer length |
32 KBytes |
Signal Amplitude |
Built-in waveforms 0-1V and 0-2V pp via BNC connector |
Custom value of 255 = 2V & 0 = 0V (8bits
resolution over 2V) |
Captured signals from channel A or B can be
duplicated into generator as custom wave |
Custom wave can be cropped and amplified via
software. |
Output impedance |
300 Ohms |
Scope modes |
SCOPE only, FFT only, GENERATOR only or SCOPE + GENERATOR |
Size |
66 X 42 X 120 mm (excluding connector protrusions) |
Operating Temp. |
10 - 30°C |